Page 14
HotStik™ 5 COB User Manual - Rev. A (c) 2014 Blizzard Lighting, LLC
DMX Mode
Allows the unit to be controlled by any universal DMX controller.
Setting the DMX Channel Mode:
1.) To select a DMX channel mode, press the <MENU> button
repeatedlyuntilyoundeither
d.001 (5ch mode), or A.001 (9ch
mode). To change the DMX starting address within either of these, use
the <UP/DOWN> buttons to scroll from
001 to 512. Press <ENTER>
toconrmyourchoice.
Stand-Alone, Master/Slave, Sound Active Modes:
Allows a single or Master/Slaved units to run factory installed programs at user
selectable speeds.
1.)TosetthextureinColorFademode,select
CF.--. Then use the
<UP/DOWN> buttons to scroll from
CF.01 to CF.99 (Slow <--> Fast).
2.)TosetthextureinColorChangemode,select
CC.--. Then use the
<UP/DOWN> buttons to scroll from
CC.01 to CC.99 (Slow <--> Fast).
3.)Tosetthexturetodisplayanyofitsbuilt-inColorMacros,select
CS.--. Then use the <UP/DOWN> buttons to scroll from CS.01 to
CS.99 (Slow <--> Fast).
4.)Tosetthextureasaslaveunit,simplydaisychain2ormoreunits
via DMX.The1stxtureinthechainwillserveasthemaster,andthe
followingxtureswillactasthemasterunitdoes.
Auto/Demo Mode:
1.)TosetthextureinAutomode,select
DENO.
Sound Active Mode:
1.) Sound active mode is available via 9ch DMX Mode between the
values of 240 <--> 255.
Manual Color Adjustment:
Allows the user to adjust the color balance of the xture.
1.) Use the <MENU> button to select
r.--- (Red Level), 9.--- (Green
Level),
b.--- (Blue Level), Y.--- (Amber), or U.--- (White Level), then
hit <ENTER>.
2.) Using the <UP/DOWN> buttons, select the maximum level for
each color between
000x255 (000=off), then hit <ENTER>toconrm.
Kommentare zu diesen Handbüchern